PIA4800 Series
Lineup
Data sheet
Note:To view the PDF file, please use Adobe Reader Ver.6 or later.
Operation Manuals
To download operation manuals (PDF), please use "Operation Manual Database".
Products Index > Power Supply Controllers > PIA4800 Series
PRODUCTS
PIA4800 Series
Power Supply Controller Supporting Multiple Channels : 5 Models
-
Interfaces -
GPIB -
RS-232C - CE marking
-
4810 / 4820 / 4830
Outline
The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.
PIA4820 is an expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
Then it is possible to use up to 3 units of PIA4820 as an expansion that can be connected to the PIA4810 via the TP-BUS, the system is capable of controlling a maximum of 32 channels. Moreover, the combined use of the GPIB and TP-BUS allows the system to control a maximum of 448 channels.
PIA4830 is a power supply controller only for digital control. It is capable of digitally controlling a system up to 32 channels of such Kikusui PAS, PAM(*1) and PMR Series DC power supplies via the TP-BUS.
OP01-PIA and OP02-PIA are control boards designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions, while the OP02-PIA4800 has only the voltage and current setting feature.
(*1) The TP-BUS interface option is factory installed option, this option should be indicated when ordering.
| Model | Specification |
|---|---|
| PIA4810 | The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled > Photo > Manual... |
| PIA4820 | The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed. > Photo > Manual... |
| PIA4830 | The power supply controller only for digital control. It is equipped with the GPIB and RS-232C interfaces. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS. > Photo > Manual... |
| OP01-PIA | The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads.
The OP01-PIA is a full-control board with voltage and current setting and read-back functions, > Photo > Manual... |
| OP02-PIA | The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads.
The OP02-PIA has only the voltage and current setting feature. > Photo > Manual... |
| Wavy for PAS&PWR
[Sequence Creation Software] Sequence Creation Software for Wavy for PAS Series or PWR Series (via PIA4830/4850)More... |
;)
| SH10
[Option(s) for Power Supplies Controller] Shunt Unit, 10A, for Models having output current rating of 2.5A to 10A |
;)
| SH50
[Option(s) for Power Supplies Controller] Shunt Unit, 50A, for Models having output current rating of 12.5A to 50A |
;)
| TU02-PIA
[Option(s) for Power Supplies Controller] Terminal Unit for PAN-A series |
;)
| SC01-10
[Option(s) for Power Supplies Controller] Shielded 26P Flat Cable, 1m length |
;)
| SC01-20
[Option(s) for Power Supplies Controller] Shielded 26P Flat Cable, 2m length |
;)
| SC03-PIA
[Option(s) for Power Supplies Controller] 2-core shielded cable for connecting OP01-PIA control board with PMC-A series DC power supplies. |
;)
| SC04-PIA
[Option(s) for Power Supplies Controller] 2-core shielded cable for connecting OP02-PIA control board with PMC-A series DC power supplies . |
;)
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
| KRA3
[Rack Adapter] Rack adapter (Inch size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More... |
| KRA150
[Rack Adapter] Rack adapter (Metric size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More... |
| B2-PIA4810/20
[Bracket] Rack mount frame bracket for PIA4810and PIA4820 installed in RMF4 (4M) |
| KBP3-2
[Blank Panel] Blank panel for KRA3 or150, width:1/2 |
| KBP3-3
[Blank Panel] Blank panel for KRA3 or150, width:1/3 |
| KBP3-6
[Blank Panel] Blank panel for KRA3 or150, width:1/6 |